Features  Static common-mode output point is 50% VCC  Wide measurement range, 5A/10A/20A/30A  1MHz chopping frequency, high bandwidth, low noise, single-ended analog output  100V safety isolation voltage between lead wires and signal pins  Low power consumption  1% error at room temperature, 3% error at full temperature range  Good temperature stability, internal Hall signal amplifier circuit and temperature compensation circuit are used  Strong anti-interference ability  Resistant to mechanical stress, magnetic parameters will not shift due to external pressure  ESD (HBM) 6000V Applications  Motor control  Load monitoring system  Switching power supply  Overcurrent fault protection

Overview
The CC6900 is a high-performance, single-ended output linear current sensor that provides a more efficient solution for AC or DC current detection. It is widely used in industrial, consumer, and communication equipment.
The CC6900 integrates a high-precision, low-noise linear Hall circuit and a low-impedance main current conductor.
When the sampled current flows through the main current conductor, the magnetic field generated induces a corresponding electrical signal on the Hall circuit. After signal processing, a voltage signal is output, making the product easier to use.
The linear Hall circuit is manufactured using an advanced BiCMOS process and includes a high-sensitivity Hall sensor, a Hall signal preamplifier, a high-precision Hall temperature compensation unit, an oscillator, a dynamic offset cancellation circuit, and an amplifier output module.
In the absence of a magnetic field, the static output is 50%VCC.
With a supply voltage of 5V, OUT can linearly change between 0.5V and 4.5V with the magnetic field, with linearity up to 0.4%.
The integrated dynamic offset cancellation circuit ensures that the IC's sensitivity is not affected by external pressure or IC packaging stress.
The CC6900 is available in an SOP8 package and has an operating temperature range of -40°C to 125°C.
CC6900 is a high-performance, single-ended output linear current sensor that can more effectively
be used for AC or DC current detection schemes, widely used in industrial,
consumer and communication equipment.
CC6900 integrates a high-precision, low-noise linear Hall circuit and a low
impedance main current line. When the sampled current flows through the main current line, the magnetic field generated induces a corresponding electrical signal on the Hall
circuit. After signal processing, the output voltage signal is obtained, making the product easier to use. The linear Hall circuit uses an advanced BiCMOS process and includes a high-sensitivity Hall sensor, a Hall signal preamplifier, a high-precision Hall temperature compensation unit, an oscillator, a dynamic offset cancellation circuit, and an amplifier output module. In the absence of a magnetic field,